Why We Why We Double Glazing Door Lock Repairs (And You Should Also!)
Why We Why We Double Glazing Door Lock Repairs (And You Should Also!)
Blog Article
Double Glazing Door Lock Repairs
Have your uPVC window or door mechanism become faulty? Perhaps the door or window handles aren't aligned properly or are hard to use.
It's important that your double glazed doors operate smoothly, otherwise you'll lose energy and increase the chances of burglary. Owen the Locksmith can repair your door lock for a reasonable price.
Snapped Key
If a key breaks inside a lock, it can be extremely frustrating. It's also potentially a security risk since the door may not be locked and could leave you vulnerable to intruders. There are fortunately simple fixes you can try to resolve the problem and get your door working properly once more.
First, remember to stay calm. If you panic and start poking around wildly you could end up pushing the damaged piece of the key even further into the lock, thereby making the situation much worse.
Then, spray WD-40 or another penetrating oil into the lock to aid in making the broken piece to slide out more easily. You can also employ a screwdriver in order to break pieces that might be blocking the way. If you have a piece of the key that is still sticking out and is not being removed, grab it with a paperclip or another thin metal object and pull it. Both methods work, but be very careful not to push the broken piece of the key even further into the keyway.
Some paperclips have grooved edges that could work in a pinch to extract hooks, and some Jigsaw blades can also be used for this use. If you don't happen to have any of these items you can bend a hook using needle-nosed pliers. Additionally, you can use a pair tweezers to grab and pull out the last piece of broken keys.
If you are unable remove the broken key piece Use a lock deicer. It's available at most hardware stores and is used to freeze any moisture present in the lock.
If none of these solutions work, it might be time to contact a locksmith. Fitlocks experts can quickly solve problems like broken handles or snapped keys using uPVC locks and door mechanisms. They can also reconfigure the double glazing door mechanisms so that they are easier to use. You can schedule an appointment online for a double-glazing repair or call us to discuss your requirements.
Broken Cylinder
A damaged cylinder can pose an extremely risky security issue. A professional locksmith is able to fix the cylinder. A locksmith will have to tap the cylinder to repair it. They can do this with an hammer or another tool, but the most efficient way is to use an extended match or piece of wire. Then, position the match's tip or wire near the keyway. After this, the locksmith will strike the lock and break it open. This is more secure than using a hammer that could cause damage to the lock.
The most common cause of cracks in the head of a cylinder is due to overheating. This can happen when the cylinder block and head are made of various metals, like cast iron and aluminum. Different metals will be heated and cool at different rates. This could cause localized hotspots to expand faster than the rest of the cylinder.
Another reason that could cause cracks in cylinders is corrosion. If the head and block of a cylinder are not maintained in a timely manner, they can rust or corrode, which can cause them to expand faster than anticipated. This could lead to cracks over time.
If your uPVC window or door lock is stiff or requires lots of pressure to turn, this could be due to a number of things. This can result from a defective locking mechanism or misalignment, and also a worn out handle.
Fortunately it's a simple and affordable fix for the majority of double glazing owners. A professional locksmith will typically be able to resolve the issue within an hour after arriving at your residence. Depending on your needs they can change the locking mechanism, change the window handles, and also change the gearboxes. A professional locksmith will always be able advise you on the most cost-effective solution for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders, which provide an additional layer of protection from burglars. This is a small cost to pay for the security that comes from read more knowing that your uPVC doors are safe.
Broken Handle
Window handle locks are complex mechanisms that wear out with age and use, so it's no surprise that they can break. If yours is damaged it's difficult to determine the source of the issue and make sure that you repair it correctly.
Whether the problem is related to the locking mechanism inside or the latch, repairing your broken handle will increase your uPVC double glazing door's security and allow you stop draughts. It is costly to replace or repair the handle in a way that isn't done correctly. It could also harm the frame and lock of your door.
Screwdriver Open the window, loosen the screw holding the handle. It should be located on the inside of the back plate, and is normally hidden by an attractive cover for the screw for aesthetic reasons. Be careful not to lose any of the internal parts within the handle, like the plates or levers that are on the opposite side of the spindle. It is best to keep them in the same order so you can double glazed window near me replace them if needed.
Then, turn the handle so it's at 90 degrees towards the window frame. Then, loosen the screw on the back of the handle that fixes it to the internal spindle with another screwdriver. Once the screw is loose, you should be capable of pulling the handle off and pull out the broken spindle. Replace it with a brand new spindle, making sure it's the same length (you can find them online or in hardware stores). Securely screw it into the frame. Don't over tighten the screw because this could harm the handle as well as the window frame.
Make sure the new handle is fitted, then close and test the handle. It should function smoothly and you'll be able to open your windows once again.
Don't forget to double-check that your uPVC window is shut properly when you're using the handle. If they don't close properly, you may experience draughts or damp in your home. You could also compromise the energy efficiency of your home. A local window company, like Core Sash Windows, will be able double glaze repair near me to adjust the hinges on your window frames to ensure they shut correctly.
Broken Spindle
It is more common for the spindle to break rather than the handle. This is especially common with uPVC tilt-and-turn windows. These types of windows require a handle which is a lock mechanism that is located in the frame of the window. The handle is attached to a centre rod that triggers a set of mushroom-like locking cams, these lock into window frame keeps. If the dead latch mechanism does not open after the handle has been turned, it is most likely the spindle is damaged. This could be a problem that is frustrating.
Luckily there are ways to fix this problem. website A reputable locksmith can swiftly and efficiently solve the issue. They can take apart the window handle using a tool to remove the wheel component of the mechanism that is where the spindle is. This is done without damage to the handle or the window frame.
After removing the wheel, the technician will inspect the spindle and identify what caused it to break. This involves breaking the spindle into its constituent parts and carefully recording their general condition, as in addition to any specific areas of wear or damage. This procedure is typically performed by technicians in an environment that is clean.
Then, clean the damaged spindle. This will help remove any dirt or other debris that could be hindering it from operating normally. After this, the spindle can be repaired or replaced. If the technician is replacing the spindle, he can use a dowel that is similar in size to the original. Then, he will drill holes that are identical to both pieces. This will ensure that the spindle will fit perfectly with the handle.
If the spindle is damaged and cannot be repaired, it might need to be replaced entirely. Home centres sell generic substitutes but if the window design is unique then you'll need to contact an expert in cabinet making or woodworking who can recreate the exact piece. Once the new spindle is in place it can be fitted to the handle by lining up double glazing units near me the screw holes on the handle with the frame's existing screws. Once the handle is firmly set, you are able to operate your uPVC windows.